FEATURES

• Max brightness 2000 Lm with compact body;
• The light flux stabilization system prevents the brightness fluctuations over the runtime;
• Full aluminum quick-release bike holder;
• Replaceable batteries;
• Separate 4-level battery indicator;
• Built-in Type-C port for charging on the go;
• Water resistance IP68 (short-term immersion under water to a depth of 2 meters);
• Thick shockproof and anti-rolling shell;
• Any brightness mode has flash option;

 INCLUDED
 • Flashlight VLF-BA286;
 • Li-ion battery Videx 21700 4000 mAh;
 • Bike holder;
 • Charging cable;
 • Adapter for 18650 battery;
 • Spare silicone pads;
 • Spare O-rings;
 • Hex keys;
 • User’s manual;

 LIGHTING MODES
 Turbo – maximum brightness level
 High – high brightness level
 Middle – medium brightness level
 Low – low brightness level
 Moon – minimum brightness level
 Strobe – pulsating light with variable flicker frequency
 Flash – a sub mode of each lighting mode (except strobe). Light with uniform flickering.

 OPERATING INSTRUCTION
 ON/OFF – press and hold the button for 0.5 seconds to turn on/off  the light.
 Modes selection – with the light switched on, shortly click the
button to cycle over the modes.
 Flash – choose the desired brightness mode, then double click to turn on the flash light. Click to exit.
Strobe – with the light either switched on or off , press and hold
the button for 3 seconds to enter the Strobe mode. Click to exit.
 Lock/Unlock – with the light switched off , double click to lock the flashlight. Repeat the procedure to unlock.

Note. The flashlight automatically memorizes the last selected lighting mode (excluding Strobe mode) and applies it next time when turned on.

BATTERY STATUS INDICATION
 With the light switched off , click the button to see the battery status. The indication will last for 3 seconds. The battery status is also continuously displayed when the light is turned on.

 4 divisions - ≤ 100% of charge;
 3 divisions - ≤ 75% of charge;
 2 divisions - ≤ 50% of charge;
 1 division - ≤ 25% of charge;
 1 division flashes – battery discharged. Recharge at the nearest opportunity.


CHARGING
Plug the USB-A socket of the charging cable into the electrical outlet. Switch off  the light, open the protective cover and connect the charging cable to the flashlight port. When charging, the indicator divisions will flash indicating the current charge level. When fully charged, all 4 divisions will turn on. After a full charge, unplug the charging cable and close the
protective cover to prevent water and dust from entering the flashlight body.
© The original batteries are supplied charged and can be used immediately after purchase, however it is recommended that the battery be fully charged before first use. The battery needs to be charged in time before it is completely discharged. During long periods of storage, it is recommended to keep the battery charging level at about half capacity to extend its service life.

Multifunction mini pocket knife Nextool NE0142(red)

The Nextool NE0142 is a multifunctional pocket knife with a small size that will give you access to many practical tools. These include scissors, file or flat screwdriver. Extremely compact design ensures that you can fit it even in your pocket, and high-quality materials support high durability.

Many possibilities

The pocket knife is equipped with a number of useful elements that will facilitate the performance of daily activities. Thanks to this, you will gain access to tools that you would not be able to take with you separately. NE0142 is a combination of functionality and convenience.

Compact design

The design of NE0142 makes it easy to fit it even in your pocket. Equip yourself with a practical set of the most necessary tools, which you can always carry with you. The pocket knife has also a special ring, which allows you to attach it to the keys. The product is available in 3 color variants - black, red and green.

Flextail Tiny Pump 2-in-1 Portable Pump (white).

Lightweight and comfortable

Versatility of nozzles

Smart charging indicator

Inflate and blow functionality

Portable and convenient to use

Suntek HC-601A Basic Trail Camera Photo Camera

Trail camera HC-601A is an advanced device that allows you to observe nature and monitor the area. It is distinguished by its built-in solar panel and lithium battery. This makes it not only environmentally friendly, but also convenient to use, allowing it to operate for a longer period of time without the need for frequent battery replacement. The high image quality, wide viewing angle and sturdy construction make the HC-601A photo trap an excellent choice.

High quality photos and video

The device is equipped with a 5-megapixel CMOS sensor that can take photos at up to 36 MP resolution, providing clear images. It also records video in 2K quality (30 fps) and in 1080P and 720P. You can easily adjust the length of the recording (from 5 to 90 seconds), allowing you to fine-tune it to fit your needs.

Wide viewing angle and fast response

With a 90° field of view lens and a PIR sensor with a detection angle of as much as 120°, the photo trap can monitor large areas. The response time to motion is just 0.3 seconds, so the device will capture any event. The adjustable sensitivity of the PIR sensor (low, medium, high) allows you to adjust the operation to suit the environment.

Reliable night operation

36 IR LEDs in the 940 nm band provide illumination of objects at distances of up to 20 meters in total darkness. The automatic IR filter guarantees clear images at night, while not betraying the location of the device.

Eco-friendly and convenient power supply

With its built-in solar panel and lithium battery, the HC-601A can last much longer. In addition, the device supports alternative power supply with 4 AA batteries.

Features for easy use

The device offers a timer function, the ability to set an operating schedule, and an audio recording option. A data overwrite function ensures uninterrupted recording, and date and time stamping makes it easy to organize footage. Operation is facilitated by an intuitive interface and a 2" TFT display.

Durability and reliability

The IP65-certified housing provides full water resistance, making the photo trap ready to operate in harsh weather conditions. The temperature range from -30°C to +70°C guarantees reliable operation all year round.

The charger is designed to safely recharge, discharge, test and recover rechargeable batteries. Charger for charging Ni-MH/Ni-Cd, Li-ion/MR/INR/ICR/LiFePO4 batteries. The charger case has a modern and ergonomic design, equipped with an LCD display and two independent channels for accumulators. The charger protects accumulators from short circuit, overcharge, overheating and incorrect polarity. With Li-ion/MR/INR/ICR and Ni-MH/Ni-Cd batteries, the device works in automatic mode and does not require monitoring during charging. Charger operating modes: CHARGE - battery charge. The charging current depends on the type and number of batteries installed. The screen displays voltage, amperage, battery type and state of charge in real time. DISCHARGE - battery discharge. It allows you to extend the battery life. REFRESH - allows you to restore the properties of batteries that have not been used for a long time. TEST - battery testing. Allows you to measure the current capacity of the battery. The maximum capacity is calculated in charge-discharge-charge mode. The POWER BANK function allows you to charge external devices when using lithium-ion batteries in the device. To do this, you need to connect a USB cable to the charger with charged batteries. The device connected in this way will receive power with a current of 2A and a voltage of 5V until the batteries are discharged. ATTENTION - the AC power supply unit is not included in the set!

VIDEX waterproof LED lamp BHD01 9W, 2800-4000-6000K is used both indoors and outdoors. It is well used for illuminating the facades of houses, near the entrance doors, under a canopy, on a balcony or patio, a terrace on the street, and indoors, on stairs, in rooms with a high level of humidity. This lamp, in addition to increased protection against dust and moisture (IP65), has the ability to work with different light temperatures. Provides natural color rendering - Ra > 90. Has a high degree of resistance to external influences. It is installed by overlaying both on vertical and horizontal surfaces.

A feature of this model is the ability to adjust the color temperature of the light depending on your needs:
- 2800K (warm light): suitable for decorative lighting of facades, terraces, recreation areas, creating a cozy atmosphere;
- 4000K (neutral white light): a universal option for illuminating entrances, parking lots, courtyards or sidewalks;
- 6000K (daylight): best suited for work areas, street lighting, driveways, gates and CCTV cameras, enhancing visibility and contrast at night.

The color temperature of the light is set by moving the slider on the back of the lamp housing to the appropriate light temperature mark of 2800K, 4000K or 6000K. Thanks to the minimalist and modern design, the lamp will look stylish in any architectural style. The transparent frame around the diffuser creates a backlight effect and makes the lamp visually lighter.

FEATURES:
- Power - 9W.
- Luminous flux - 1000Lm.
- Color temperature of light – 2800-4000-6000K.
- Has a high light output – 111Lm/W.
- Energy efficiency of lighting – A+ (UA) / E (EU).
- Beam angle – 160°.
- Operating voltage in the range from AC 220 to 240V.
- Uniform bright lighting without flickering, instant on function and no ultraviolet radiation.
- Service life – 50,000 hours.
- Number of ON/OFF cycles – 25,000.
- Dust and moisture protection class – IP65.
- Impact protection class – IK08.

The decorative internal luminaire is designed for lighting modern apartments, bars, restaurants, cafes, etc. It is suitable for loggias and corridors, as well as separate zones in large rooms. The body of the lamp is made of aluminum - a light and durable metal that is not subject to corrosion. The surface of the case is covered with matte paint with a sandy texture, resistant to small scratches. Depending on the type of lamps used, this lamp can be used both for general lighting of rooms and for accent lighting of individual zones in the interior. It has a rotating head that allows you to direct the light to the desired area. Luminaires with a replaceable light source have their advantages, such as no need to replace the entire luminaire in the event of a bulb failure.

Waterproof LED wall lamp VIDEX WL03 18W 3000-4000-6500K is used both indoors and outdoors. It is well used for illuminating the facades of houses, near the entrance doors, under a canopy, on a balcony, a terrace on the street, and indoors, on stairs, in rooms with a high level of humidity. This lamp, in addition to increased protection against dust and moisture (IP65), has the ability to work with different light temperatures. It is installed by overlaying on vertical surfaces. The size of the lamp is only 250x47mm.

A feature of this model is the ability to adjust the color temperature of the light depending on your needs:
- 3000K (warm light): comfortable lighting for courtyards, private houses, facade lighting, beautifully emphasizes the natural shades of wood and plants;
- 4000K (neutral white light): a universal option for lighting an entrance, parking lot, yard or sidewalk;
- 6500K (daylight): best suited for work areas, outdoor lighting, driveways, gates and CCTV cameras, enhancing visibility and contrast at night.

The color temperature of the light is set by moving the slider located on the back of the lamp housing to the corresponding light temperature mark of 3000K, 4000K or 6500K.

FEATURES:
- Power - 18W.
- Luminous flux - 1850Lm.
- Color temperature of light - 3000-4000-6500K.
- Has a high light output - 103Lm/W.
- Lighting energy efficiency - F (EU).
- Beam angle – 120°.
- Operating voltage in the range from AC 220 to 240V.
- Uniform bright lighting without flickering, instant on function and no ultraviolet radiation.
- Service life – 25,000 hours.
- Number of ON/OFF cycles – 15,000.
- Dust and moisture protection class – IP65.

LED flashlight VIDEX VLF-A376, 3600Lm 5000K is hermetic, has a rigid body and a wide light range. The user can choose not only the required operating mode, but also the light color: white or red.

Unlike other VIDEX flashlight models, this model has 2 lighting colors (white and red), a larger number of lighting modes and can be used with two types of batteries (adapter included).

The kit includes a Li-ion battery 21700 4000mAh, a belt clip, a spare cap for the tactical button, spare gaskets, an adapter for changing to an 18650 battery, and instructions for use.

Maximum brightness 3600Lm. A CREE XHP50.2 20W LED diode is used for white light and 2 x CREE XPE 3W LEDs for red light.

Flashlight Controls:

The flashlight has a simple button control system that allows you to easily switch between lighting modes and use it with one hand. It has two control buttons: the Tactical Button and the Mode Switch button.

1) The Tactical Button, located on the top of the housing, provides quick access to the flashlight. To turn the light on, press the button halfway. To turn the light off, release it. Or you can turn the light on and off by fully pressing the Tactical Button.
2) When the flashlight is on, press and hold (0.5 seconds) the switch to switch between white and red light.
3) When the white light is on, briefly press the switch to switch between its brightness modes (MOON, LOW, HIGH, TURBO, STROBE).
4) When the red light is on, briefly press the switch to switch between its brightness modes (LOW RED, HIGH RED, STROBE RED).

Flashlight operating mode:

TURBO (Turbo mode) – with the highest light brightness of 3600 Lm. Illumination distance is 300 m. Operating time is 2.5 hours. Luminous flux intensity is 21440 cd. Operating time in TURBO mode is the total tested time with overheating protection turned on.

HIGH (Maximum light power mode) – light brightness is 1100 Lm. Illumination distance is 180 m. Operating time is 3 hours. Luminous flux intensity is 7960 cd.

LOW (Minimum light power mode) – light brightness is 300 Lm. Illumination distance is 100 m. Operating time is 12 hours. Luminous flux intensity is 2560 cd.

MOON (Night mode) – the longest possible operating time in this mode is 232 hours, while generating a luminous flux of 10 lm. Illumination distance is 27 m. Luminous flux intensity 188d.

STROBE (Flashlight) – quickly emits repeated pulses of bright white light. Luminous intensity 3600 lm. Operating time 2.5 hours. Illumination distance is 300 m. Luminous flux intensity 21440 cd. Operating time in STROBE mode is the total tested time with overheating protection turned on.

HIGH RED (Maximum power red light) – luminous intensity 100 lm. Illumination distance is 30 m. Operating time 7 hours. Luminous flux intensity 260 cd.

LOW RED (Minimum power red light) – luminous intensity 10 lm. Illumination distance is 10 m. Operating time 69 hours. Luminous flux intensity 25 cd.

STROBE RED (Flashing red light) – luminous intensity 10 lm. Operating time 69 hours. Illumination distance 10 m. Luminous flux intensity 25 cd.

Discharge time tested with VIDEX battery 21700 4000 mAh. The above parameters may vary depending on the environment. The flashlight automatically remembers the selected mode.

Charging is available via USB Type-C charging cable. The flashlight charges in approximately 2.5 hours. Batteries can be used 21700 (included) or 18650 (using an adapter).

The LED indicator located on the mode switch informs about the charge level of the flashlight:
- Green glows when fully charged (100-80%).
- Green flashes when charged 79-50%.
- Red glows when charged 49-25%.
- Red flashes when charged 24-1%.

Joyroom JR-ZS368 Magnetic Cable Organizer 3-Pack (White)

The Joyroom magnetic cable clips offer a unique solution to keep your cables organized effortlessly. With these clips, you can easily and quickly tidy up your cables without worrying about them getting tangled. This solution is perfect for maintaining a clutter-free desk. The package includes 3 magnetic organizers.

Thoughtful Design

The Joyroom clips are equipped with highly adhesive acrylic glue, allowing you to mount them virtually anywhere, whether it's on wood, a wall, or marble. Furthermore, their compact size (14.6 × 22 × 22 mm) ensures they won't take up too much space, and their intelligent design makes them easy to conceal while keeping things tidy. This magnetic organizer is the perfect tool to help you maintain order in any space, regardless of the number of cables.

    • On-mode power (Pon): 10 W
    • Useful luminous flux of the contained light source (Φuse): 1000 Lm
    • Correlated color temperature: 5000K (neutral white)
    • Peak luminous intensity: 5250 cd
    • Distance: 140 m
    • Operation mode: TURBO, HIGH, MIDDLE, LOW, MOON, RED HIGH, RED LOW, RED FLASH
    • Housing colour: Black
    • Input interface: USB-C
    • Charging current: DC 5V, 1A
    • Fall protection: 1 m
    • Operating temperature range: -20° +40°C
    • Dimmable: no
    • Magnetic base: Yes
    • Lens material: Tempered glass
    • Reflector surface: TIR lens
    • Light source replaceable: no
    • Battery type: Li-ion 18650
    • Battery voltage: 3.7 V
    • Battery capacity: 2200 mAh
    • Battery indicator: 4 level
    • Battery replaceable: yes
    • Full charge time: 2 h 15 min
    • Full discharge time: 90 h
    • Discharge stabilization: Full
    • Mercury content: Does not contain
    • Ingress protection: IP66
    • Housing material: Anodized aluminum
    • Height: 118 mm
    • Width: 25 mm

The flashlight has white and red light. Thanks to the magnetic base, the presence of a headband and a removable clip in the kit, the dust and moisture protection class (IP68) and the drop protection class up to 2m, it has a large number of scenarios for use.

Maximum brightness 200 Lm. The Luminus SST20 LEDis used. An additional feature of the flashlight is its ultra-light weight - 75g.

FLASHLIGHT CONTROL:
You need to control the flashlight modes using the power button located on its body. With it, you can turn on, turn off, lock the flashlight, switch between brightness modes and colors, and activate the charge indicator.
1. To turn on the flashlight, press and hold the power button for about 0.5 seconds.
2. To switch between red and white light, press the power button twice on the flashlight when it is on. When switching between colors, the flashlight always defaults to low power mode.
3. Switch between flashlight brightness modes by pressing the power button on the flashlight when it is on.
4. To lock, press and hold the power button on the flashlight for 3 seconds. The flashlight will blink three times with a weak red light, indicating that it is locked.

FLASHLIGHT OPERATION MODES:
*HIGH (Maximum brightness white light mode) - light brightness 200Lm. Lighting distance is 70m. Operating time 10h. Luminous flux intensity 1100cd.
*MIDDLE (Medium brightness white light mode) - light brightness 50Lm. Lighting distance is 34m. Operating time 14h. Luminous flux intensity 293cd.
*LOW (Minimum brightness white light mode) - light brightness 3Lm. Lighting distance is 10m. Operating time 100h. Luminous flux intensity 26cd.
*RED HIGH (Red light mode with maximum brightness) - light brightness 15Lm. Lighting distance is 10m. Operating time 10h. Luminous flux intensity 20cd.
*RED LOW (Red light mode with minimum brightness) - light brightness 5Lm. Lighting distance is 8m. Operating time 18h. Luminous flux intensity 15cd.
*RED FLASH (Red flashing light mode) - light brightness 5Lm. Lighting distance is 8m. Operating time 36h. Luminous flux intensity 15cd.


CHARGING:
The flashlight itself does not have a built-in charging port. Charging is done via the USB-C port located on the included Li-ion AA 1.5V 2200mAh rechargeable battery. To charge the battery, turn off the flashlight, unscrew the back cover counterclockwise, and remove the battery. Connect one end of the USB-A charging cable to the charger and the other USB-C to the battery charging port. While charging, the green indicator on the battery will flash to indicate that charging is in progress. When fully charged, the indicator will be constantly on. After charging, disconnect the cable, insert the battery with the anode (+) to the power button, and screw the cap tightly.

When the flashlight is off, pressing the power button once activates the LED indicator, which displays the remaining battery charge. The indicator remains visible for 3 seconds unless it is turned off first by pressing the power button once again. Indicator:
- Green when fully charged 100-75%.
- Green flashing when charged 74-50%.
- Red when charged 49-25%.
- Red flashing when charged 24-1%.

WARNING! It is strictly forbidden to use the flashlight while charging!

EcoFlow DELTA Pro 3 portable power station

The EcoFlow DELTA Pro 3 power station is revolutionizing the way we manage energy. With a powerful output of up to 4 kW in a single unit and expandable capacity of up to 12 kWh, the DELTA Pro 3 will meet the needs of both small home appliances and demanding industrial equipment. It is quiet, efficient and ready to handle any situation - from everyday power outages to powering up in remote areas. It is versatile and, above all, safe and child's play, making it indispensable in modern and well-planned homes. The 5-year warranty represents the manufacturer's confidence in the durability and reliability of the DELTA 3 Pro - see for yourself!

Unmatched power with X-Boost

With DELTA Pro 3, energy is available anytime, anywhere. It offers an impressive AC output power of up to 4,000 watts, which means it can easily handle powering demanding appliances such as air conditioners, washing machines and electric ovens. Not enough? Thanks to innovative X-Boost technology, the station's output can increase up to 6,000 watts, making it one of the most powerful units on the market. The system's expandable capacity of up to 12 kWh makes the DELTA Pro 3 easily adaptable to most of your needs.

Fast and smart power handling

A built-in UPS (Uninterruptible Power Supply) function with a delay of just 10 ms protects your valuable electronic devices from sudden power outages. It's a guarantee of continuous operation without risking damage to your equipment. In addition, the advanced power management system, X-Guard monitors 40 key safety parameters 24/7, providing maximum protection against overload, overheating, surges and other hazards.

Quiet operation and efficient cooling

One of the distinguishing features of the EcoFlow DELTA Pro 3 is its quiet operation - at half load it generates a noise level of only 30 dB, within a whisper. This makes it virtually inaudible in everyday use. Thanks to the advanced X-Cooling 3.0 cooling system, the device automatically adjusts airflow, ensuring optimal operating temperature and component longevity.

Mobile and easy to use

With the EcoFlow DELTA Pro 3, you don't have to worry about complicated installation or wall drilling - the unit offers a true plug-and-play solution. Just take it out of the package, plug it in and it's ready to go. Thanks to its clever design and relatively light weight (about 51.5 kg), the power station is one of the lightest in its class, and its built-in casters and telescoping handle make it easy to transport and mobile, even in difficult terrain.

Flexible charging options

Six available charging methods make the EcoFlow DELTA Pro 3 station a flexible solution for a variety of needs. You can charge it using a standard AC outlet, a gas generator, your car's alternator, a solar input, an EV charger, or even through your car's cigarette lighter. X-Stream technology allows the station to be fully charged in less than 60 minutes, ensuring the station is quickly ready for any challenge and energy independence.

Robust and weatherproof

The EcoFlow DELTA Pro 3 was developed with reliability and safety in mind. Equipped with a state-of-the-art Cell-To-Chassis (CTC) design and an IP65-certified lithium-iron-phosphate (LFP) battery, it is resistant to dust, water, impact and fire. These solutions ensure not only the longevity of the battery (more than 4,000 cycles to 80% capacity), but also trouble-free operation in all weather conditions - from frosty evenings to hot days.

Intuitive control with the EcoFlow app

With DELTA 3 Pro, you take control. With the dedicated EcoFlow app, energy management is even more intuitive. The app allows you to monitor energy consumption, optimize charging and remotely control the device from anywhere. You have full control over the charging schedule, allowing you to increase energy efficiency and ultimately save money. The Time-of-Use (TOU) function allows you to optimize solar power consumption, reducing costs, as well as the noise generated by the device.

Design teeming with luxury

The design of the EcoFlow DELTA Pro 3 station manifests its style and innovative solutions. It draws inspiration from the line of luxury sports cars, combining both form and functionality. The finish, covered with a special UV coating, not only adds to the aesthetics, but also provides additional durability, protecting the device from scratches and external influences. With its sleek silhouette and precise details, the DELTA Pro 3 fits perfectly into modern spaces, becoming a stylish addition to any home or RV.

Included

• DELTA Pro 3 x 1
• AC charging cable x 1
• Handle cover x 2
• Quick start guide x 1
• Solar installation guide x 1
• Introduction to the application x 1
• Safety guide x 1
• Ecosystem introduction page x 1

Portable 2-in-1 Mosquito Repellent Flextail Max Repel S (Green)

Drop Resistance

Two Repellent Modes

Fast Heating

Power Bank

Waterproof and Versatile

Fanttik X8 Apex Portable Compressor

The Fanttik X8 Apex is a portable compressor designed for precise and instant inflation of tires and other items. It can inflate a tire approximately 26.3" in diameter from 28 to 33 PSI) in just 56 seconds, and has an operating accuracy of ±1 PSI, making it a precise device.

High performance and long operating time

Thanks to its capacious battery and innovative cooling system, the X8 Apex can run continuously for 40 minutes in typical outdoor conditions, pumping up to 16 tires without cooling breaks. This is ideal for long trips or outdoor work.

Simple one-button operation

The unit offers four pre-set pumping modes (bike, motorcycle, car, ball) and three pressure units (PSI, KPA, BAR). Simply select a mode and the compressor automatically stops when the preset pressure is reached, eliminating the need for constant monitoring.

Long reach, high resistance hose

The X8 Apex is equipped with a 5.5-meter long, heat-resistant hose that can easily handle tires up to R22 size at pressures up to 150 PSI. This allows you to inflate tires from any side of the vehicle, even in hard-to-reach places.

Additional functions - powerbank and flashlight

The compressor also serves as an emergency power source - it has a USB-C port (Universal Serial Bus Type-C, universal connector for data and power; 5V/3A input) and a USB-A port (Universal Serial Bus Type-A, universal connector for data and power; 5V/2A output) for charging your phone or other mobile devices. An LED (Light Emitting Diode, light emitting diode) flashlight generating continuous and SOS light is placed on top for easy use at night and in emergency situations.

Included

• portable compressor
• USB charging cable
• hose
• pumping needle
• Schrader-Presta valve adapter
• storage case
• user manual

Fanttik X9 Pro Portable Compressor

The Fanttik X9 Pro is a compact, portable air compressor with a maximum working pressure of 150 PSI, designed to quickly inflate car, motorcycle, bicycle and ball tires. It stands out for its lightning-fast operation - it will inflate a passenger car tire in just 1 minute - and its advanced cooling system that allows for up to 23 minutes of continuous operation. The large LED (Light Emitting Diode, or light-emitting diode - a semiconductor element that emits light when an electric current flows through it) high-brightness display remains readable even in bright sunlight, making it easy to operate in the field.

Fast pumping

The device allows you to instantly inflate a car tire from 30 to 35 PSI in one minute. With a maximum pressure of 150 PSI, it will work well for a variety of applications - from cars and motorcycles to bicycles, balls, etc.

Integrated storage system

A special accessory compartment built into the housing prevents accessories from getting lost. The air hose is integrated into the body of the unit for easy access and storage.

Powerful battery and cooling

The built-in 7.4-volt (2.5 Ah) rechargeable battery provides a long run time, and the cooling system allows uninterrupted operation for 23 minutes without the risk of overheating. This ensures that the device is ready for action even with extended use.

Smart control

The X9 Pro offers 4 dedicated modes (car, motorcycle, bike, ball) and a manual mode. When the set pressure is reached, the device automatically shuts off, eliminating the need to constantly monitor the device's operation.

Simple and safe operation

The Smart On/Off system allows the compressor to be turned on by extending the yellow end of the hose and off by retracting it. In addition, the unit automatically shuts off after 3 minutes of inactivity, increasing safety and saving energy.

Included

• Fanttik X9 Pro compressor
• Hose
• Pump needle
• Presta valve adapter
• USB-A to USB-C cable
• User manual

LED industrial lamp (technical lighting) High Bay VIDEX 150W, 27,000Lm, 5000K is a powerful industrial-type lamp. VIDEX technical - industrial luminaires are used to replace conventional lighting in warehouses and production facilities, as well as for use in industrial lighting systems where continuous lighting is required 24 hours a day, 7 days a week! The product is equipped with a lightweight and durable aluminum alloy housing. It does not overheat, and its lamp is able to create uniform, bright light without flickering for a long period of time. Its dimensions are 290x151 mm.

The Higy Bay luminaire has high impact protection IK07 and a high degree of protection against dust and moisture IP65, such technical parameters ensure safe use of the device in rooms with high humidity or outdoors.

The lamp has an increased light output - 180Lm/W. The total luminous flux of the VIDEX technical luminaire is 27,000Lm. The luminaire is equipped with LED diodes, which provide diffused light, it is designed to replace outdated old-type warehouse lamps with inefficient incandescent lamps. The light dispersion angle is 90°.

The industrial luminaire allows you to save up to 90% of energy compared to inefficient incandescent lamps, has a long service life and high resistance to loads during switching on and off (25,000 times). Service life - 50,000 hours. The luminaire is mounted using chain-shaped suspensions, the length of which is easily adjustable and which can be installed on suspensions or fixed supports.

EcoFlow DELTA 3 portable power station

Ensure reliable access to electricity in almost any situation! The EcoFlow DELTA 3 portable power station is distinguished by its capacity of as much as 1 kWh (expandable up to 5 kWh) and offers up to 1800 watts of power (up to 2400 watts in X-Boost mode). It can be charged in several ways and is characterized by high durability, and it works extremely quietly - its noise level does not exceed 30 dB (at 600 W). It will also prove itself as a UPS - it switches to emergency power in just 10 ms. What's more, convenient management of the station is enabled by a dedicated EcoFlow app.

You will charge it in several ways

Thanks to various charging options, you can easily prepare the station for work regardless of the circumstances. For example, you can charge it using an AC outlet - the X-Stream technology makes it last only about 56 minutes! Want to charge the DELTA 3 while camping or in the garden? Take advantage of the photovoltaic panels with up to 500 watts of power! You can also charge the station using your car's alternator (in just about 1.3 hours) or a power generator. You can also combine charging using an outlet and solar power to get the DELTA 3 ready to go in about 56 minutes.

It will power up to 99% of commonly used devices

Going camping, traveling in an RV, or perhaps an unexpected power outage? DELTA 3 will prove itself in these and many other situations! The station offers an output power of up to 1,800 watts, and in X-Boost mode it can handle a load of up to 2,400 watts. This means it can easily power most popular devices, such as smartphones, computers, routers, refrigerators and even microwaves and kettles.

Connect up to 11 devices simultaneously

The station is equipped with a variety of ports - you have four AC outlets, two USB-A ports (up to 18 watts each), two USB-C ports (up to 100 watts each), one car outlet (12.6 volts, 126 watts) and two DC5521 ports (12.6 volts, up to 3 amps). So you can connect as many as 11 devices to it simultaneously! Say goodbye to limitations and enjoy reliable operation of the equipment you need.

Will not disturb your peace of mind

Despite its powerful capabilities, the station works surprisingly quietly. With a load of 600 watts, its noise level does not exceed 30 dB - the same as that of a whisper or ticking clock! As a result, you can use it without disturbance even at night - it will not disturb your peace and quiet.

Be prepared for power failures with the UPS function

With EcoFlow DELTA 3 you won't be intimidated by unexpected power outages. The station offers a UPS function and can switch to emergency power in just 10 ms! Thanks to this, it is able to ensure uninterrupted operation of devices such as computers, NAS servers or 3D printers, for example. You no longer have to worry about data loss or damage to your equipment!

Additional capabilities with the application

Connect the station with the EcoFlow app and get even more possibilities. With its help, for example, you can conveniently monitor the most important parameters of the device. There is also a storm warning function and special TOU (Time of Use) modes that optimize energy consumption - so you can save on your bills! In addition, the app will send you notifications regarding possible power outages and UPS operation.

An investment for years to come

DELTA 3 is equipped with a powerful and durable LiFePO4 (40135) battery, which is distinguished by a life span of up to 4,000 cycles (up to 80% capacity). This translates into about 10 years of use! You also don't have to worry about rapid damage to the station. Its IP65 rating guarantees its resistance to water and dust, and thermal propagation protection prevents hazards such as fire, for example. DELTA 3 also benefits from an intelligent BMS that manages the battery and ensures reliable operation.

Large expandable capacity

The capacity of the DELTA 3 station is as high as 1 kWh - enough to power your chosen devices for a very long time! You can also expand it up to 5 kWh - just use an additional battery pack for DELTA 3 (1 kW), DELTA 2 Max (2 kW) or DELTY Pro 3 (4 kW). You no longer have to worry that the equipment you need will run out of energy to operate!

Hassle-free transportation

The station weighs about 12.5 kg, and its dimensions are 398 x 200 x 284 mm. Its transportation will not cause you any difficulties - you can easily move it from place to place or take it on a trip! Thanks to its compact design, DELTA 3 will easily fit even in narrow, confined spaces, for example, in a car.