Bulb LED GX53 12W, 1170Lm 4100K, <140* VIDEX (neutral white)

The alkaline batteries save working properties longer, possess bigger capacity, life time and operating temperature range compared with the heavy duty. Due to the discharge characteristics of batteries, they are used in divices, that require steady load (wireless divices, radios, cameras).

TITANUM TLF-T10SO solar powered portable flashlight with battery is designed for use in the dark or in rooms without lighting. It has a convenient ergonomic shape, a built-in solar panel and is powered by a battery. A feature of this model is two light sources: front (main) and side, which are used mainly for close-range lighting. Suitable for use in everyday life, fishing or tourism.

WORKING MODES:
High – high brightness front light mode.
SIDE – side light mode.
The parameters for each mode are listed on the packaging.

LIGHT CONTROL
- Enable – move the mode switch forward or back to enable.
- Turn off – move the mode switch to the middle position to turn off.
- "High" mode - front light of high brightness, to turn on, you need to move the mode switch to the forward position all the way.
- "SIDE" mode - side light, to turn on, you need to move the mode switch to the position back to the stop.

TECHNICAL CHARACTERISTICS
Luminous flux: front light 50 lumens, side light 50 lumens
Color temperature: 5500K
Beam range: 50m
Battery type: Li-ion 18650
Battery capacity: 800mAh, 3.7V
Working time: up to 5 hours
Charging port: Micro USB
Mains voltage: DC 5B
Current strength: 500mA (max)
Charging time: from the network up to 4.5 hours; from the solar panel until 8 p.m
Nominal power of the solar panel: 0.25W
Nominal voltage of the solar panel: 5V ± 10%
Solar panel size: 70x25mm
Color rendering index: Ra ≥ 70
Class of protection against dust and moisture: IPX2
Materials: ABS
Dimensions of the lantern: 34x37x179mm
Weight: 80g (with battery)

CHARGE THE LANTERN
From the network. The battery of the flashlight is charged using a Micro USB cable through the corresponding charging port in the case. During charging, the indicator will be constantly lit in red. Charging time from the network is from 3.5 to 4.5 hours. To prevent the battery from overcharging, the flashlight has a built-in protection that will stop further charging when the battery is fully charged. After a full charge, it is necessary to disconnect the charging cable from the flashlight.
From the solar panel. The lantern's battery is charged using a solar panel located in the lantern's housing. During charging, the indicator will constantly glow red, depending on the intensity of the sun's rays, the indicator may glow brighter or darker. The charging time from the solar panel is up to 20 hours.

The built-in battery comes charged and can be used immediately after purchase, but it is recommended to fully charge the battery before first use. During storage, it is recommended to keep the battery charged for optimal performance.

WARNING!
Avoid direct light into the eyes. This model does not provide for the possibility of independent replacement of power elements. It is forbidden to disassemble the lantern, this may lead to a violation of the operational characteristics and void the warranty.

The BLE Locking Standard 2 module enables digital management for key-operated door locks. All your digital keys can be used safely and conveniently with the BLE Locking mobile app.

• Wi-Fi
• Bluetooth
• RFID Card
• Pin Code

Digital key
Access through the mobile app using Bluetooth. The module doesn't need Wifi.

Remote digital key
The module must be connected to Wifi. Remote access needs to be allowed. Doors can be opened from a distance either through the mobile app or from a desktop.

Pin code
Extend the module with any PIN pad supporting the Wiegand protocol. The module needs to be connected to WiFi, at least during the times when new PIN codes are shared or removed.

RFID cards
Extend the module with any card reader supporting the Wiegand protocol. The module needs to be connected to WiFi, at least during the times when new RFID cards are shared or removed.

Link access
Open doors without the need to register an account. Visitors will receive only a link to their email or SMS. The module needs to be connected to Wifi, and remote access needs to be allowed.

Scheduled unlocking
Define a weekly time schedule when doors are automatically unlocked. The module must be connected to WiFi.


Technical specifications:

Power supply:  12 VDC

Relays (quantity and type):

• 1 x non-latching, maximum load 10 A,  
• 240VAC,  
• or maximum load 10 A, 12VDC

Radio protocols & network:

• Wi-Fi 802.11 b/g/n,  
• Bluetooth v4.2 BR/EDR and BLE,  
• External WiFi/BT antenna (optional)

Additional connectivity:  1 x Wiegand reader or 2× analogue inputs for hardware switch / PIRsensor / Hall-effect sensor

Physical connectors:   Relay in / out, power, input switch 7 - gang terminal for cables up to 1 mm²

IP rating:   IP41

Power consumption:  

• Normal operation 50 mA,  
• Maximum 200 mA

Operating temperature:   -40ºC to 75ºC

Weight:   40g

Physical properties:

• Dimensions: ⌀=49.6mm, h=25.00mm
• Weight: 40g
• Working temp.:-40 toi 75°C

Note: The module requires a 12 VDC power supply with a nominal power of at least 3W.

BLE Locking Client Portal & App

https://admin.blelocking.com

Features:

• Cloud-based access management system that can be fully managed both on mobile devices and desktops:
• Real-time access logs and monitoring.
• User level
 access rights.
• Digital key access over web link.
• Digital key-based access sharing. Create permanent or temporary access
• Digital key access with mobile phone over Bluetooth or internet

Portable charger (Power Bank) TITANUM is designed for charging tablets, smartphones, mobile phones and other devices and gadgets. It allows you to keep your favorite gadgets in working condition for a long time during a hike, trip, trip or in a situation when there is no electricity. The body is made of ABS plastic, which has a grooved surface, which in turn helps prevent scratches on the body and makes it more secure in the hand.

USEFUL FUNCTIONS: Has two flashlights built into the case on the front and a display that shows the battery level according to the 25, 50, 75 and 100% marks.

Output voltage: has 2 USB outputs, each of which outputs 5V, 2.1A (max.), maximum output power 2.1A (max.)

Input voltage: 5V, 2A - for both Micro USB and Type-C inputs.

The set includes a Type-C cable with a length of 30 cm for charging the device.

LED surface downlight luminaire. Slim design and narrow frames give a more modern look compared to other analogues. A good choice if you are not capable to make mounting holes. Mounted directly on a flat surface (wall or ceiling). Suitable for lighting passageways, corridors and for the main lighting of other premises. 170° large angle beam bright and broad light illuminate the maximum space of your rooms. Metal housing protected from yellowing, cracking and performs efficient heat dissipation, which in turn extends the total service life of the product up to 30000 hours. Driver is hidden inside the body. When connected directly to the mains, it will ensure stable operation in case of voltage drops. Operating voltage 220-240V.

The BLE Locking PRO module enables digital management for key-operated door locks. All your digital keys can be used safely and conveniently with the BLE Locking mobile app

Digital key
Access through the mobile app using Bluetooth. The module doesn't need Wifi.

Remote digital key
The module must be connected to Wifi. Remote access needs to be allowed. Doors can be opened from a distance either through the mobile app or from a desktop.

Pin code
Extend the module with any PIN pad supporting the Wiegand protocol. The module needs to be connected to WiFi, at least during the times when new PIN codes are shared or removed.

RFID cards
Extend the module with any card reader supporting the Wiegand protocol. The module needs to be connected to WiFi, at least during the times when new RFID cards are shared or removed.

Link access
Open doors without the need to register an account. Visitors will receive only a link to their email or SMS. The module needs to be connected to Wifi, and remote access needs to be allowed.

Scheduled unlocking
Define a weekly time schedule when doors are automatically unlocked. The module must be connected to WiFi.


Technical specifications:

    Power supply:   9−40V DC

    Relays (quantity and type):   2× latching, 16A 250V AC

    Radio protocols & network:  

• 10BaseT/100BaseTX Ethernet, Auto Negotiation,   
• Wi-Fi 802.11 b/g/n,   
• Bluetooth v4.2 BR/EDR and BLE,   
• External 2.8dBi wifi/BT antenna

    Physical connectors:  6 pluggable terminals: power, RS485, relays, 1−wire, 2×Wiegand; 4×GPIO

    IP rating:  IP41

    Power consumption:

• Normal operation 0.6W
• Maximum 2.4W

    Operating temperature:  -40ºC to 75ºC

    Weight:  320g

    Physical properties:  Dimensions: W=178mm, D=55mm, H=25mm

    Installation:  Wall mount, DIN-rail mount

Modules - Compatibility:

•     Electric Solenoid
•     Gate
•     Garage Door
•     Elevator
•     Barrier
•     Wiegand supported code / RFID card reader

    

Tips and tricks
In the event that you have multiple locks and digital keys in our mobile app, simply enable "Shake to open." Open the BLE Locking app, shake your phone, and it will unlock your door without the need to search for the right digital key.

Install our NFC sticker near your door. Simply touch the NFC sticker with your phone, and it will automatically open the BLE Locking app and unlock the door.


Modern access Management
Create, share, revoke access, or monitor activities in real-time through the BLE Locking mobile app or the web-based Client Portal.

Set smart limitations for shared accesses, including:

•  Date and time limitations
•  Usage count limitations
•  Unlimited access

Explore custom API integration possibilities for seamless integration with other systems or services.

BLE Locking Client Portal & App

https://admin.blelocking.com

Features:

• Cloud-based access management system that can be fully managed both on mobile devices and desktops:
• Real-time access logs and monitoring.
• User level
 access rights.
• Digital key access over web link.
• Digital key-based access sharing. Create permanent or temporary access
• Digital key access with mobile phone over Bluetooth or internet

Light that is comfortable for the eyes, does not cause fatigue and does not worsen the emotional state, thanks to the natural color rendering Ra>80. White light 4100K creates bright and comfortable lighting, close to daylight. This lamp does not contain mercury or other harmful substances. The shelf life is unlimited. Not subject to disposal as household waste.