LED headlamp VIDEX VLF-H066A 2000Lm, 5000K. Has white and red light. White light has high and low beam modes. Thanks to the magnetic base, the presence of a mechanical switch, dust and moisture protection class (IP67) and a drop protection class up to 2m, it has a large number of scenarios for use. It operates on a replaceable Li-ion 18650 battery with a capacity of 2200mAh (possibility to change to VIDEX 18650 3400mAh - bought separately).
FLASHLIGHT CONTROL:
You need to control the flashlight modes using the power button and the mechanical switch located on its body. With it, you can turn on, turn off, lock the flashlight, switch between brightness modes and colors, and activate the charge indicator.
1. To turn on the flashlight, turn the switch clockwise from the "Lock" position to the desired mode.
2. In white high beam, white low beam and red light modes, switch between brightness modes by pressing the power button.
3. To turn off the flashlight, press and hold the power button for 0.5 seconds to turn off the light, or turn the switch back to the “Lock” position to turn off and lock the flashlight.
FLASHLIGHT OPERATION MODES:
*SPOT HIGH (White high beam maximum brightness mode) – light brightness 1000Lm. Lighting distance is 130m. Operating time 1h 45min. Light flux intensity 3000cd.
*SPOT MIDDLE (White high beam medium brightness mode) – light brightness 400Lm. Lighting distance is 100m. Operating time 3h. Light flux intensity 2500cd.
*SPOT LOW (Minimum brightness mode of white high beam) – light brightness 70Lm. Lighting distance is 30m. Operating time 25h. Light intensity 70cd.
*TURBO (Mode of simultaneous low and high beam white light) – light brightness 2000Lm. Lighting distance is 150m. Operating time 1h 30min. Light intensity 4000cd.
*FLOOD HIGH (Maximum brightness mode of white low beam) – light brightness 1000Lm. Lighting distance is 80m. Operating time 1h 45min. Light intensity 1700cd.
*FLOOD MIDDLE (Mode of medium brightness of white low beam) – light brightness 150Lm. Lighting distance is 30m. Operating time 7h. Luminous flux intensity 217cd.
*FLOOD LOW (Minimum brightness mode of white low beam) - light brightness 5Lm. Lighting distance is 10m. Operating time 280h. Luminous flux intensity 20d.
*RED HIGH (Maximum brightness red light mode) - light brightness 15Lm. Lighting distance is 10m. Operating time 10h. Luminous flux intensity 20cd.
*RED LOW (Minimum brightness red light mode) - light brightness 5Lm. Lighting distance is 8m. Operating time 18h. Luminous flux intensity 15cd.
*RED FLASH (Red flickering light mode) - light brightness 5Lm. Lighting distance is 8m. Operating time 36h. Luminous flux intensity 15cd.
Discharge time tested with a stock VIDEX Li-ion 18650 battery with a capacity of 2200mAh at a temperature of 21±3°C and a humidity of 50-80%. Actual performance may vary depending on the environment and type of battery used. Automatically remembers the selected mode.
CHARGING:
Charge the flashlight using the USB-C charging cable provided. To charge the flashlight, turn off the flashlight and open the protective silicone cap. Connect the USB-A end of the charging cable to the charger and the other end to the charging port of the flashlight. The indicator will glow red during charging. When fully charged, the indicator will turn green. After charging, disconnect the cable and close the protective cap tightly to prevent water or dust from entering the flashlight.
When the flashlight is off, pressing the power button once activates the LED indicator, which displays the remaining battery charge. The indicator remains visible for 3 seconds unless turned off by pressing the power button once again. Indicator:
- Green when fully charged (100-80%).
- Green flashing when 79-50% charged.
- Red when 49-25% charged.
- Red flashing when 24-1% charged.
ATTENTION! It is strictly forbidden to use the flashlight while charging!