LED rechargeable, portable light VIDEX VL-NL014W-S
LED rechargeable, portable light VIDEX VL-NL014W-S
Product:
Cena:
€ 8.72
€ 10.90
Delivery time at the pickup address:
Currently option in not available
Shipping time to parcel box:
To our warehouse:
In our stock
Shipping company:
2
working days
Total days:
2
working days
Tuesday 22.04.2025
Shipping cost:
From € 2.50
Shipping time by courier:
To our warehouse:
In our stock
Shipping company:
3
working days
Total days:
3
working days
Wednesday 23.04.2025
Shipping cost:
From € 4.90
In order for above mentioned delivery dates by parcel locker and courier to be met, order has to been placed in time and seller has managed to send it out by the end of working day.
-
Gaismas plūsma (lm):50
-
Krāsas spektrs (K):3000/4000/6500K
-
Pielietojums:Pārvietojams apgaismojums - plaukti, skapji, nelielas telpas
-
Krāsa:Balta
-
Mitruma aizsardzības klase:IP20
-
Sensors:Yes
-
Garantija:2
-
Produkta izmēri (GxPxA) mm:125X42.5X15
-
Materiāls:plastikāts
-
Svars (kg):0.5
-
Skaits iepakojumā (gab.):120
-
Nominālais spriegums (V), frekvence (Hz):USB Type-C (5V, 0.5A), baterija Li-pol 3.7V 750mAh
-
Kalpošanas laiks (h):uzlāde 1.5h
-
Difuzora materiāls:Polikarbonāts
LED RECHARGEABLE LIGHT WITH MOTION SENSOR VIDEX VL-NL014W-S
The product is intended for local illumination of domestic premises, cabinets, bookshelves etc. Illuminates a certain area at night by detecting movement using a sensor.
INCLUDED
- LED rechargeable light;
- Charging cable;
- Metal bar;
- Double-sided adhesive tape;
- User’s manual;
- Individual packaging.
INSTALLATION
There are 3 ways to install the light:
a) Use double-sided adhesive tape to stick to any surface permanently. Please be noted, that double-sided
adhesive is unmovable once attached;
b) Use built-in magnets to attach to any iron surface;
c) Use double-sided adhesive tape and metal bar to stick to any surface. Then use the built-in magnetic points
to attach the light to metal bar.
OPERATING INSTRUCTIONS
Please read below instructions before use.
ON/OFF. Press and hold the ‘’М’’ button for 2 seconds to turn on/off the light.
Modes selection. With the light switched on, shortly press the ‘’М’’ button to cycle through the following modes:
Night sensor. The light will turn on automatically when the sensor detects movement at night/dark and
then it will turn off after 20 seconds when there is no motion sensed.
Day sensor. The light will turn on automatically when the sensor detects movement at day/bright and then
it will turn off after 20 seconds when there is no motion sensed.
Light ON. The lamp is turned on manually and remains lit until it is turned off or the battery runs out.
Brightness adjustment. With the light switched on, press and hold the (LIGHT BUTTON) button to adjust the brightness.
Color temperature adjustment. With the light switched on, shortly press the (LIGHT BUTTON) button to switch the light
color temperature between warm white, neutral white and cold white.
CHARGING
Plug the USB-A socket of the charging cable into electrical outlet and connect the charging cable to the light’s
input port.
When charging, the indicator light is red. When fully charged the indicator light is green.
It recommended that the battery be fully charged before first use.
FUNCTIONAL CHARACTERISTICS
This product can only be used indoor. The product has no protection against moisture and cannot be used in damp area.
Piegādes veicam ar Omniva, Venipak, DPD un Latvijas Pasts starpniecību.
Apmaksu, par pirkumu, var veikt tiešsaistē.
Apmaksu uz vietas var veikt ar maksājuma karti.
