LED rechargeable, portable light VIDEX VL-NL013W-SR
LED rechargeable, portable light VIDEX VL-NL013W-SR
Product:
Cena:
€ 15.90
Delivery time at the pickup address:
Currently option in not available
Shipping time to parcel box:
To our warehouse:
In our stock
Shipping company:
2
working days
Total days:
2
working days
Thursday 13.03.2025
Shipping cost:
From € 2.50
Shipping time by courier:
To our warehouse:
In our stock
Shipping company:
3
working days
Total days:
3
working days
Friday 14.03.2025
Shipping cost:
From € 4.90
In order for above mentioned delivery dates by parcel locker and courier to be met, order has to been placed in time and seller has managed to send it out by the end of working day.
-
Gaismas plūsma (lm):150
-
Krāsas spektrs (K):3000/4000/6500K
-
Pielietojums:Pārvietojams apgaismojums - plaukti, skapji, nelielas telpas
-
Krāsa:Balta
-
Mitruma aizsardzības klase:IP20
-
Sensors:Yes
-
Garantija:2
-
Produkta izmēri (GxPxA) mm:300x40x29
-
Materiāls:plastikāts
-
Svars (kg):0.155
-
Skaits iepakojumā (gab.):24
-
Nominālais spriegums (V), frekvence (Hz):USB Type-C (5V, 1A), baterija Li-ion 18650 2200mAh
-
Kalpošanas laiks (h):uzlāde 3h
-
Difuzora materiāls:Polikarbonāts
LED RECHARGEABLE LIGHT WITH MOTION SENSOR VIDEX VL-NL013W-SR
PRODUCT’S PURPOSE AND APPLICATION
The product is intended for local illumination of domestic premises, cabinets, bookshelves etc. It can automatically Illuminate a certain area by detecting movement with the help of a built-in sensor.
INCLUDED
- LED rechargeable light;
- Charging cable;
- Magnetic base;
- Double-sided adhesive tape;
- Remote controller with CR2025 battery;
- User’s manual;
- Individual packaging.
INSTALLATION
There are 3 ways to install the light:
a) Use double-sided adhesive tape to stick to any surface permanently. Please be noted, that double-sided adhesive is
irremovable once attached;
b) Use built-in magnets to attach to any iron surface;
c) Use double-sided adhesive tape and metal bar to stick to any surface. Then use the built-in magnetic points to attach
the light to metal bar.
OPERATING INSTRUCTIONS
Please read below instructions before use.
Režīmu slēdzis ON / AUTO / OFF:
OFF. The device is turned off;
Auto. The light will be operated by the motion sensor.
ON. Constant light mode.
Touch button (TOUCH BUTTON),
Color temperature adjustment. With the light switched on, tap the button to switch the light color temperature between warm white, neutral white and cold white.
Brightness adjustment. With the light switched on, touch and hold the button to adjust the brightness.
CONTROLS BY REMOTE CONTROLLER:
Please pull out the protective transparent pad from the remote controller.
1. Turn on the device;
2. Turn off the device ;
3. Constant light on mode;
4. Day sensor mode. The light will turn on automatically when the sensor detects movement at day/bright and then
it will turn off after 20 seconds when there is no motion sensed.
5. Night sensor mode. The light will turn on automatically when the sensor detects movement at night/dark and
then it will turn off after 20 seconds when there is no motion sensed.;
6. Color temperature switching between warm white, neutral white and cold white;
7. Increase/decrease the brightness by one step;
8. Set the brightness as 10/50/100%;
9. Set the brightness as 100%;
10. Auto off timers. Push to set the light to automatically turn off after 15/30/45/60/120 minutes respectively.
CHARGING
Plug the USB-A socket of the charging cable into electrical outlet and connect the charging cable to the light’s
input port.
When charging, the indicator light is red. When fully charged the indicator light is green.
It recommended that the battery be fully charged before first use.
FUNCTIONAL CHARACTERISTICS
This product can only be used indoor. The product has no protection against moisture and cannot be used in damp area.
Piegādes veicam ar Omniva, Venipak, DPD un Latvijas Pasts starpniecību.
Apmaksu, par pirkumu, var veikt tiešsaistē.
Apmaksu uz vietas var veikt ar maksājuma karti.
