Bike Portable Flashlight VIDEX VLF-BA286 2000Lm 5000K, Li-ion 21700 4000mAh
Bike Portable Flashlight VIDEX VLF-BA286 2000Lm 5000K, Li-ion 21700 4000mAh
Product:
€ 49.90
Delivery time at the pickup address:
Currently option in not available
Shipping time to parcel box:
To our warehouse:
In our stock
Shipping company:
2
working days
Total days:
2
working days
Thursday 05.12.2024
Shipping cost:
From € 2.50
Shipping time by courier:
To our warehouse:
In our stock
Shipping company:
3
working days
Total days:
3
working days
Friday 06.12.2024
Shipping cost:
From € 4.90
In order for above mentioned delivery dates by parcel locker and courier to be met, order has to been placed in time and seller has managed to send it out by the end of working day.
-
Jauda (W):LED Luminus SST40 20W
-
Gaismas plūsma (lm):2000
-
Krāsas spektrs (K):5000
-
Stara leņķis (°):
-
Pielietojums:Ārtelpas
-
Krāsa:Melna
-
Mitruma aizsardzības klase:IP68
-
Triecienu aizsardzības klase:Fall protection: 2 m
-
Sensors:
-
Garantija:2
-
Produkta izmēri (GxPxA) mm:111mm х 31mm х 31mm
-
Materiāls:Aviācijas anodēts alumīnijs, rūdīts stikls
-
Svars (kg):0.121
-
Skaits iepakojumā (gab.):20
-
Patrona:Input interface: USB-C
-
Nominālais spriegums (V), frekvence (Hz):DC 5V, 2A (Li-ion 21700 (included Li-ion 18650 adapter), 4000 mAh)
-
Kalpošanas laiks (h):Battery repleceable: yes, Full discharge time: 100 h, Battery voltage: 3.7 V, Full charge time: 2.5 h
-
Difuzora materiāls:Magnetic base: No, Lens material: Tempered glass, Reflector surface: TIR lens
-
Darba temperatūras diapazons (°C):-20° +40°C
-
Aptumšojams (Dimmēšana):Operation mode: TURBO, HIGH, MIDDLE, LOW, MOON, STOBE
-
Diapazons (attālums m):
FEATURES
INCLUDED
• Flashlight VLF-BA286;
• Li-ion battery Videx 21700 4000 mAh;
• Bike holder;
• Charging cable;
• Adapter for 18650 battery;
• Spare silicone pads;
• Spare O-rings;
• Hex keys;
• User’s manual;
LIGHTING MODES
Turbo – maximum brightness level
High – high brightness level
Middle – medium brightness level
Low – low brightness level
Moon – minimum brightness level
Strobe – pulsating light with variable flicker frequency
Flash – a sub mode of each lighting mode (except strobe). Light with uniform flickering.
OPERATING INSTRUCTION
ON/OFF – press and hold the button for 0.5 seconds to turn on/off the light.
Modes selection – with the light switched on, shortly click the
button to cycle over the modes.
Flash – choose the desired brightness mode, then double click to turn on the flash light. Click to exit.
Strobe – with the light either switched on or off , press and hold
the button for 3 seconds to enter the Strobe mode. Click to exit.
Lock/Unlock – with the light switched off , double click to lock the flashlight. Repeat the procedure to unlock.
Note. The flashlight automatically memorizes the last selected lighting mode (excluding Strobe mode) and applies it next time when turned on.
BATTERY STATUS INDICATION
With the light switched off , click the button to see the battery status. The indication will last for 3 seconds. The battery status is also continuously displayed when the light is turned on.
4 divisions - ≤ 100% of charge;
3 divisions - ≤ 75% of charge;
2 divisions - ≤ 50% of charge;
1 division - ≤ 25% of charge;
1 division flashes – battery discharged. Recharge at the nearest opportunity.
CHARGING
Plug the USB-A socket of the charging cable into the electrical outlet. Switch off the light, open the protective cover and connect the charging cable to the flashlight port. When charging, the indicator divisions will flash indicating the current charge level. When fully charged, all 4 divisions will turn on. After a full charge, unplug the charging cable and close the
protective cover to prevent water and dust from entering the flashlight body.
© The original batteries are supplied charged and can be used immediately after purchase, however it is recommended that the battery be fully charged before first use. The battery needs to be charged in time before it is completely discharged. During long periods of storage, it is recommended to keep the battery charging level at about half capacity to extend its service life.
- Max brightness 2000 Lm with compact body;
- The light flux stabilization system prevents the brightness fluctuations over the runtime;
- Full aluminum quick-release bike holder;
- Replaceable batteries;
- Separate 4-level battery indicator;
- Built-in Type-C port for charging on the go;
- Water resistance IP68 (short-term immersion under water to a depth of 2 meters);
- Thick shockproof and anti-rolling shell;
- Any brightness mode has flash option;
INCLUDED
• Flashlight VLF-BA286;
• Li-ion battery Videx 21700 4000 mAh;
• Bike holder;
• Charging cable;
• Adapter for 18650 battery;
• Spare silicone pads;
• Spare O-rings;
• Hex keys;
• User’s manual;
LIGHTING MODES
Turbo – maximum brightness level
High – high brightness level
Middle – medium brightness level
Low – low brightness level
Moon – minimum brightness level
Strobe – pulsating light with variable flicker frequency
Flash – a sub mode of each lighting mode (except strobe). Light with uniform flickering.
OPERATING INSTRUCTION
ON/OFF – press and hold the button for 0.5 seconds to turn on/off the light.
Modes selection – with the light switched on, shortly click the
button to cycle over the modes.
Flash – choose the desired brightness mode, then double click to turn on the flash light. Click to exit.
Strobe – with the light either switched on or off , press and hold
the button for 3 seconds to enter the Strobe mode. Click to exit.
Lock/Unlock – with the light switched off , double click to lock the flashlight. Repeat the procedure to unlock.
Note. The flashlight automatically memorizes the last selected lighting mode (excluding Strobe mode) and applies it next time when turned on.
BATTERY STATUS INDICATION
With the light switched off , click the button to see the battery status. The indication will last for 3 seconds. The battery status is also continuously displayed when the light is turned on.
4 divisions - ≤ 100% of charge;
3 divisions - ≤ 75% of charge;
2 divisions - ≤ 50% of charge;
1 division - ≤ 25% of charge;
1 division flashes – battery discharged. Recharge at the nearest opportunity.
CHARGING
Plug the USB-A socket of the charging cable into the electrical outlet. Switch off the light, open the protective cover and connect the charging cable to the flashlight port. When charging, the indicator divisions will flash indicating the current charge level. When fully charged, all 4 divisions will turn on. After a full charge, unplug the charging cable and close the
protective cover to prevent water and dust from entering the flashlight body.
© The original batteries are supplied charged and can be used immediately after purchase, however it is recommended that the battery be fully charged before first use. The battery needs to be charged in time before it is completely discharged. During long periods of storage, it is recommended to keep the battery charging level at about half capacity to extend its service life.
Piegādes veicam ar Omniva, Venipak, DPD un Latvijas Pasts starpniecību.
Apmaksu, par pirkumu, var veikt tiešsaistē.
Apmaksu uz vietas var veikt ar maksājuma karti.
